Filters

Export results

Equipment


Scanning electron microscopy INSPECT S50

Technical description: Source Tungsten hairpin filament, which is mounted within tetrode gun assembly Voltage 200 V to 30 kV Beam Current Up to 2 μA Resolution (measured as particle separation on a carbon substrate) High-vacuum mode: - 3.0 nm at 30 kV (SED) - 10.0 nm a…

Differential Scanning Calorimetry (DSC)

Technical description: DSC type Double-furnace design Measurement principle Power-compensation Furnace material 90% platinum alloy Temperature sensors Distributed, platinum resistance thermometers Range -180 ˚C to 750 ˚C Accuracy ±0.05 ˚C Precision ±0.008 ˚C…

Drawing machine - skew rolling mill

Contact person: Błoniarz Remigiusz
Technical description: Assembly of machines with a common drive based on a 67 kW DC motor. The torque is transmitted through disengageable couplings to one of two machines: a drawing machine or a skew rolling mill. The drawing bench allows you to draw bars and pipes with …

Scanning Probe Microscope

Contact person: Cieniek Łukasz
Technical description: Operating modes: AFM – Atomic Force Microscopy LFM – Lateral Force Microscopy MFM – Magnetic Force Microscopy EFM – Electric Force Microscopy PFQNM - PeakForce Quantitative Nano-Mechanical Mapping Area of analysis XY from max…

Vacuum Induction Melting Furnace

Contact person: Drożdż Paweł
Technical description: The vacuum induction melting  furnace is used for melting and casting iron alloys under vacuum conditions with a weight of up to 10 kg (and after replacing the coil up to 25 kg). It consists of one melting chamber in which a crucible with an in…

Zwick Z250

Contact person: Błoniarz Remigiusz
Technical description: Universal testing machine is used to precisely determine of materials properties under quasi-static conditions. The machine is appointed for the following applications with particularly high demands: • Low-Cycle-Fatigue tests as mechanical, the…

Heating and strain gauge table

Technical description: Force range (compression and tension): 5kN Operating temperature range: 20-1000°C Traverse speed: 0.1 – 20 µm/s Total displacement of the linear encoder: 45 mm (resolution: 100 nm)

ASP 2

Contact person: Błoniarz Remigiusz
Technical description: ASP II servo-hydraulic thermomechanical simulator from Servotest, enabling sequential and simultaneous torsion tests (continuously, in both directions) and axial tests (tension and compression). The machine can test solid materials - mainly metals a…

3D printer

Contact person: Dubiel Beata
Technical description: The device is dedicated for the additive manufacturing of parts from metal powders with a particle diameter approx. 40 µm by means of laser-asisted powder bed fusion process (LPBF). It is used for precise 3D printing of elements with maximum d…

Ultrasonic atomizer

Contact person: Dubiel Beata
Technical description: Ultrasonic atomizer equipped with an ultrasonic system with a frequency of 35-36 KHz, allowing the manufacturing of spherical powder for application in additive methods with a powder particle size of approx. 45 µm. The device is equipped with …