Equipment
Laser ultrasound non-destructive inspection system
Contact person:
Ambroziński Łukasz
Technical description:
The setup for non-destructive testing using laser-generated ultrasound is used to test construction materials such as metal alloys and composite materials. The device allows for non-contact excitation and detection of ultrasonic waves.
Frezarka CNC EBERLE FRP 600
Contact person:
Błoniarz Remigiusz
Technical description:
CNC milling machine in gantry configuration, equipped with a tool magazine with a capacity of 8 tools. The 3-axis machine allows the movement of each axis: X=320 mm, Y=250 mm, Z=250 mm. The clamping surface of the table is 500x250 mm. The rotational…
thermobalance, calorimeter
Contact person:
Kargul Tomasz
Technical description:
The device is equipped with a scale with a resolution of 0.1 µg and an air-cooled furnace with rhodium heating elements, allowing for testing in the temperature range from RT to 1550°C, in an inert or oxidizing atmosphere. The furnace'…
FIB-SEM, SEM Scanning Electron Microscope with FIB Ion gun
Contact person:
Kruk Adam
Technical description:
FIB-SEM Crossbeam 350 with GEMINI column and FEG electron source offers high resolution imaging using advanced detection modes including InLens (SE), InLens (EsB), Angle Selective Back-Scattered Detector (AsB). The imaging settings of the Gemini opt…
Micro-XRF scanner
Contact person:
Szczerbowska-Boruchowska Magdalena
Technical description:
The system is equipped with two low power X-ray tubes (30 W) with Rh and Ag anodes. The tube with the Rh anode is equipped with a polycapillary lens, which allows obtaining an X-ray beam with a diameter of 20 µm. The Ag anode X-ray tube can be…
Optical profilometr
Contact person:
Rozmus-Górnikowska Magdalena
Technical description:
Vertical scanning interferometry mode, phase shift interferometry mode and a mode combining both of the above techniques. - 10mm vertical scan range with closed-loop feedback for the entire scan range. - Camera with a matrix of 640 x 480 pixels and …
Nanohardness Tester NHT 50-183; Nano-Scrach Tester NST 50-146
Contact person:
Radziszewska Agnieszka
Technical description:
Nanohardness Tester: The device is used to measure the hardness of materials with a fine-crystalline structure, thin layers. Performing single and cyclic measurements. Possibility of applying loads from 0.05 mN to 500 mN. Equipped with a Berkovich i…
Press 500
Contact person:
Lisiecki Łukasz
Technical description:
Hydraulic press with a maximum pressure of 5 MN. The machine has a unique ability to work with a constant strain rate among machines of this type. The press has been designed to deform materials in two ranges of traverse speed:
- normal ran…
Ion Milling
Contact person:
Kopyściański Mateusz
Technical description:
Penning-type Ar ion gun, operating at a voltage in the range from 0kV to 6kV Ability to observe the sample during the polishing and cutting process using a stereoscope Sample polishing range: diameter 50 mm, height 25 mm Flat miling mode: -maximum s…
Scanning electron microscopy Nova Nano SEM 450
Contact person:
Kopyściański Mateusz
Technical description:
Source NSFEG with ultra-high brightness Schottky field emitter, High and low vacuum analysis Resolution high-vacuum imaging, optimum working distance - 0.8 nm at 30 kV (STEM) - 1.0 nm at 15 kV (TLD-SE) - 1.4 nm at 1 kV (TLD–SE without beam dec…
